A warehouse floor coating ends concrete dust, brightens the building and protects the slab from forklift wear. It is one of the least expensive ways to make a warehouse easier to clean and safer to work in.
Prince George moves freight for the whole north, with rail, highway and air all meeting here. Warehouses along Boundary Road, in the new Global Logistics Park and near the airport hold everything from lumber and building supply to mill parts, and their floors see steady traffic.
Forklift lanes, dock plates and turning corners wear much faster than the slab under a rack. We build the warehouse floor coating thicker in those busy zones and lighter where the floor only sees people walking.
That way you are not paying for a heavy build across every square foot. The estimate breaks the building into zones and names the system for each one.
WorkSafeBC's regulation says designated walking routes must be clearly marked, and floor lines are the plainest way to do it. We paint walkways, forklift lanes, stop bars and rack lines as part of the warehouse floor coating, so the lines are sealed under the clear coat rather than wearing off the top.
The easiest time to coat a warehouse floor is before the racking goes in. New concrete needs time to cure and dry, and we test it before any coating. If the building is already full, we work zone by zone, on nights or weekends, so shipping carries on.
Saw cut joints in a busy warehouse often chip along their edges. We rebuild them with semi-rigid joint filler before coating, and our concrete floor repair page covers that work.
Loading docks let in cold air and snow every time a door opens, and cold rooms stay chilly all year. For those areas we use a warehouse floor coating that sets in low temperatures and add grit near the doors, where forklift tires bring in meltwater.
Bare concrete sheds a fine powder every time a forklift turns, and that powder settles on stock, packaging and shelving. A warehouse floor coating seals the surface for good, so the sweeper only picks up what falls off the pallets.
The sealed floor also throws light back up into the aisles. Light grey is the usual pick, because it brightens the space without showing every tire mark, and on tall racking that extra light makes top-shelf labels easier to read. Over the years, a warehouse floor coating also stops the slow wear that grooves the busiest aisles.
Phone (778) 744-5382 to book a walk-through for your warehouse floor coating. The Prince George Epoxy Flooring home page lists every system we install.
Lots of projects pair a garage coat with a basement floor, or a shop coat with slab repairs.
Garage floor coating keeps salty slush and drip oil sitting on the surface, where a squeegee can move them, rather than soaking into the slab. Every garage gets a diamond grind first, which gives the resin real concrete to grab.
View Garage Floor Coating
A shop floor coating shields the concrete in a working bay from oil, coolant, road salt and falling steel. It is built heavier than a house garage floor, with grit locked in so mechanics stay on their feet when the bay is wet.
View Shop Floor Coating
Basement epoxy flooring replaces a cold, powdery slab with a sealed surface that shrugs off water, dropped weights and spilled detergent. Lower levels that have ever had a damp corner are where it pays off most.
View Basement Epoxy Flooring
Industrial epoxy flooring gives a plant a thick, sealed surface built for forklifts, hot water, oil and chemicals. The thickness is set area by area, according to what rolls and spills across each part of the floor.
View Industrial Epoxy Flooring
Polyaspartic floor coating is the quick-setting option for cold Prince George garages and shops. Each coat firms up within hours, even in temperatures that would stall ordinary epoxy, and most floors take a vehicle about two days later.
View Polyaspartic Floor Coating
A coated commercial floor is joint-free, mops clean, resists stains and holds up to carts, rolling chairs and winter boots. It replaces tired tile, carpet and bare concrete in clinics, offices, shops, showrooms and staff rooms.
View Commercial Epoxy Flooring
Concrete floor repair is the groundwork under every good coating. We chase out cracks, rebuild chipped joint edges, fill pits and patch scaled spots, and we fix failed coatings and floors worn thin as well.
View Concrete Floor Repair
Spilled acid, caustic, solvent and fuel will eat bare concrete and ordinary epoxy, and a chemical resistant floor coating is the barrier that stops them. Battery rooms, chemical stores, labs, wash bays and process areas are where it belongs.
View Chemical Resistant Floor Coating
A metallic floor is a decorative resin finish with swirls of shimmering colour that look like polished marble or stone. It goes over concrete in basements, home bars, offices and showrooms.
View Metallic Epoxy FlooringLet us know the rough size of the room and what goes on in it, and we will line up a visit.
Send a few facts about your slab, and a phone call to arrange a visit will follow. If a phone call suits you better, dial +1 (778) 744-5382.
